diff --git a/lib/drawdxf.py b/lib/drawdxf.py
index eb5b0a3..801f9f1 100644
--- a/lib/drawdxf.py
+++ b/lib/drawdxf.py
@@ -20,6 +20,7 @@ class Point:
 @dataclass
 class Polyline:
     id: str
+    s_artinr: str
     coords: List[Point]
     length: float
 
@@ -270,13 +271,12 @@ def parse_sensors_from_json(positions_json):
 def export_excel(plines, out_path):
     # Hier für Excel Export
     print("creating excel file with cable information ..")
-    sens2cable = map_sensor_to_cable(sensors, plines)
-    write_excel_from_json(plines, sens2cable, out_path)
+    write_excel_from_json(plines, out_path)
     print("done")
 
-def write_excel_from_json(plines:Polylines, sens2cable: dict, outpath:str):
+def write_excel_from_json(plines:Polylines, outpath:str):
     wb = Workbook()
-
+    sens2cable = map_sensor_to_cable(plines)
     # Dicts für Anzahl bzw kummulierte Länge
     count_summary = defaultdict(int)
     length_summary = defaultdict(float)
@@ -284,24 +284,21 @@ def write_excel_from_json(plines:Polylines, sens2cable: dict, outpath:str):
     #Worksheet 1 - Kabellängen nach Kabel-ID
     ws1 = wb.active
     ws1.title = "Length by ID"
-    ws1.append(["Cable-ID", "True Length (m)", "Cable-ArtNr"])
+    ws1.append(["Cable-ID", "True Length (m)", "Cable-ArtNr", "Cable-Name (short)"])
 
     for pl in plines.kabel:
         length = pl.length /1000                # Umrechnung von mm in m
-        artnr = sens2cable[pl.id]
-        ws1.append([pl.id, length, artnr])
+        for artnr in sens2cable[pl.id]:
+            cable_name = ""
+            if artnr != "Kabel länger als max. Kabellänge":
+                cable_name = cable_cfg["Sivasnummern"][artnr]
+            ws1.append([pl.id, length, artnr, cable_name])
 
-        if "MA" in pl.id:
-            length_summary[artnr] += math.ceil(length)      # Aufrunden von z.b. 10,3 auf 11 m (volle Meter!)
-
-
-        # MB als Motor gesetzt! Beachte auch Zuordnung in get_cable_artnr!!
-
-        elif "MB" in pl.id:                                 # MB statt MA zur Motor-Kennzeichnung
-            length_summary[artnr] += math.ceil(length)      # Aufrunden von z.b. 10,3 auf 11 m (volle Meter!)       
-        
-        else:
-            count_summary[artnr] += 1
+            if "MA" in pl.id:
+                length_summary[artnr] += math.ceil(length)      # Aufrunden von z.b. 10,3 auf 11 m (volle Meter!)       
+            
+            else:
+                count_summary[artnr] += 1
     
     # Worksheet 2 - Kabelnummern und Stückzahlen
     ws2 = wb.create_sheet("Cables SIVAS")
@@ -444,45 +441,47 @@ def get_cable_artnr(section, length):
 
     return None
 
-def map_sensor_to_cable(sensors, plines):
-    sens2cable = defaultdict()
+def map_sensor_to_cable(plines):
+    sens2cable = defaultdict(list)
+    
     for pl in plines.kabel:
-        # Sensorname von Kabel-ID extraieren
         sensor_name = pl.id.split('-')[-1]
-        # Kabellänge aus gleichem Eintrag auslesen + in m umrechnen
         cable_length = pl.length/1000
-
-        # Sensor Artikelnummer aus positions.json holen
-        sensor_artinr = sensors[sensor_name].artinr
-
-        # Verzweigung, um welchen Typ es sich handelt (Special Keys)
+        sensor_artinr = pl.s_artinr
         name_prefix = sensor_name[0:2]
 
-        section = None  #Default
+        sections = []  #Default
 
-        # Hier MB ebenfalls als Motor gezählt. Motoren in Fortna-Layout nicht angebunden!
-        if name_prefix == "MA" or name_prefix == "MB":
-            section = "MA"
+        if name_prefix == "MA":
+            sections = ["MA"]      # Sektion für Motor-Kabel
+
+        elif name_prefix == "MB":
+            sections = ["WD_Q"]      # Sektion für Ventil-Kabel
             
         elif name_prefix == "QM":
-            section = "WD_Q"
+            sections = ["WD_Q"]    # Sektion für Ventil-Kabel
 
-        elif sensor_name.startswith("B"):
-            if sensor_artinr == 829422026:
-                section = "WD_I-829422026"
+        elif sensor_name.startswith("B"):   # Sensor Name beginnt mit B -> Sensor jeglicher Art
+            if name_prefix == "BX":         # Wenn "BX", dann Scanner 
+                sections = ["WF_B", "WD_I"]            # Sektion für Scanner Patch-Kabel und Sektion für Standard-Sensorkabel zur Spannungsversorgung 
+                cable_length = max(0.0, cable_length -4.0)  # 4 Meter abziehen, da bereits 5m Kabelschwanz an Scanner dran
+            elif sensor_artinr == 829422026:
+                sections = ["WD_I-829422026"]
             elif sensor_artinr == 720002003:
-                section = "WD_I-720002003"
+                sections = ["WD_I-720002003"]
             else:
-                section = "WD_I"
+                sections = ["WD_I"]
         
-        if section is None:
-            cable_artnr = "Kein Kabeltyp zu Sensor-Artikelnummer zugewiesen"
-        else:
+        if not sections:
+            sens2cable[pl.id].append ("Kein Kabeltyp zugewiesen")       
+            continue 
+
+        for section in sections:
             cable_artnr = get_cable_artnr(section, cable_length)
             if cable_artnr is None:
-                cable_artnr = "Kabel länger als max. Kabellänge"
-
-        sens2cable[pl.id] = cable_artnr
+                sens2cable[pl.id].append(f"Kabel länger als max. Kabellänge")
+            else:
+                sens2cable[pl.id].append(cable_artnr)
     
     return sens2cable
            
@@ -531,7 +530,8 @@ if __name__ == '__main__':
     # Config für Kabel-Atikelnummern laden
     cable_cfg = configparser.ConfigParser()
     cable_cfg.optionxform = str     #Keys case-sensitive
-    cable_cfg.read(os.path.join(config_dir, "kabel.cfg"))
+    with open(os.path.join(config_dir, "kabel.cfg"), encoding="utf-8") as f:
+        cable_cfg.read_file(f)
 
     dxf_file = args.dxf