Schoenenberger_Systeme_GmbH/dxfmakros
7
0
Fork 0
Code Issues 1 Pull Requests Actions Packages Projects Releases Wiki Activity

[MERGE] Lager branch in main

Browse Source
This commit is contained in:
Simon Hensch
2026-10-30 11:44:19 +01:00
parent 473aeec5bf 989ee398ce
commit 5821619e12
96 changed files with 9707 additions and 727 deletions
Download Patch File Download Diff File Expand all files Collapse all files
lang/en_GB.json
+128 -9
View File
@@ -9,6 +9,7 @@
"vfl-as-auto-erkannt": "\n>>> Start point lies on the KS_AUS of an existing %1 chain - no AS element needed.",
"vfl-familie-neutral": "GF/VF",
"vfl-sep-nach-durch-es-ueberschrieben": "\n>>> Separator AFTER ignored - the ES element already brings its own separator at the chain end (otherwise two separators in a row).",
"vfl-sep-gf-es-automatisch": "(A separator between GF and ES is inserted automatically.)",
"vfl-echo-position": "\n>>> Position: X=%1 Y=%2 Z=%3",
"vfl-echo-wahl": "\n>>> Selected: %1",
"vfl-aus-seite-header": "\n\nOUT element (AS_Element_*) - select side:",
@@ -55,6 +56,27 @@
"vfl-gf-laenge-modus-opt-hoehe": "\n 2 - Set target height (length will be calculated)",
"vfl-gf-laenge-modus-opt-steigend": "\n 3 - Rising GF (special case, up to 3 degrees)",
"vfl-gf-laenge-modus-opt-qc": "\n 4 - QC line with GF (automatic up/down calculation)",
"vfl-gf-laenge-modus-opt-parallel": "\n 5 - Continue parallel to the carousel (distance only)",
"vfl-richtung-header": "\n\nIn which direction should the chain be built?",
"vfl-richtung-opt-vor": "\n 1 - Build forwards (the picked point is the start of the chain)",
"vfl-richtung-opt-rueck": "\n 2 - Build backwards (the picked point is the end of the chain, ES outlet)",
"vfl-prompt-es-achse-p2": "\n\nTravel direction - 2nd point (defines the direction only, the end point stays): ",
"vfl-es-basislinie-info": "\n Outfeed axis (travel direction): %1 degrees.",
"vfl-rueck-menu-linie-gf": "\n 1 - New line: GF (gravity section)",
"vfl-rueck-laenge-opt-anfangspunkt": "\n 1 - Pick start of chain (length results, start height is calculated)",
"vfl-rueck-laenge-opt-anfangshoehe": "\n 2 - Set start height (length will be calculated)",
"vfl-rueck-prompt-anfangspunkt": "\n\nPick the start of the chain (direction is fixed by the outfeed axis): ",
"vfl-rueck-prompt-anfangshoehe": "\nDesired height at the start of the chain (mm) <%1>: ",
"vfl-rueck-alert-hoehe-zu-klein": "The start of the chain must be HIGHER than its end - a gravity section falls in the travel direction.",
"vfl-rueck-erfolg-punkt": "\n>>> Built backwards: GF section %1 mm (horizontal), start height %2 mm.",
"vfl-rueck-erfolg-hoehe": "\n>>> Built backwards: GF section %1 mm (horizontal), start height %2 mm.",
"vfl-rueck-erfolg-parallel": "\n>>> Backwards, parallel to the carousel: GF section %1 mm (horizontal), bend %2 degrees %3.",
"vfl-par-prompt-abstand": "\n\nDistance to the carousel (mm, perpendicular to the feed axis, from AS KS_EIN to bend KS_AUS): ",
"vfl-par-nur-kettenanfang": "'Parallel to the carousel' only works at the start of a chain with an AS element AND a defined feed axis (2nd point in the AS dialog).",
"vfl-par-kein-bogen": "No GF bend cancels the AS plan turn of %1 degrees (side %2) - cannot close parallel to the carousel.",
"vfl-par-kein-versatz": "The AS element does not turn away from the feed axis - no distance can be reached this way.",
"vfl-par-zu-klein": "Distance %1 mm too small: AS and bend alone already need %2 mm. Please choose a larger distance.",
"vfl-par-erfolg": "\n>>> Parallel to the carousel: GF section %1 mm (horizontal), bend %2 degrees %3, resulting distance %4 mm.",
"vfl-qc-nur-kettenanfang": "\nERROR: 'QC line with GF' is only possible at the chain start (needs its own AS side) - please choose a different mode.",
"vfl-qc-prompt-richtung": "\n\nChoose direction (line on which AS entry and ES exit shall lie) - click a point in the travel direction: ",
"vfl-qc-ks-ein-gemessen": "\n>>> AS KS_EIN (reference line) measured: X=%1 Y=%2 Z=%3",
@@ -99,6 +121,11 @@
"vfl-es-setzen-frage": "\n\nPlace ES element?",
"vfl-es-nein-zielpunkt": "\n 2 - No (chain ends directly at the target point)",
"vfl-prompt-endpunkt-fahrtrichtung": "\n\nSelect end point along travel direction (defines the length): ",
"vfl-prompt-as-achse-p2": "\n\nFeed axis - 2nd point (defines the direction only, the start point stays): ",
"vfl-basislinie-punkte-gleich": "\n The two points are identical - no direction can be derived. Aborting.",
"vfl-basislinie-info": "\n Feed axis (travel direction): %1 degrees.",
"vfl-basislinie-ohne": "\n No feed axis defined - the direction follows from the next click.",
"vfl-as-seite-ermittelt": "\n AS side from the position of the next point: %1",
"vfl-endpunkt-modus-header": "\n\nHow should the end point be determined?",
"vfl-endpunkt-modus-opt-linie": "\n 1 - Draw target line (2 points) - the intersection defines the length",
"vfl-prompt-ziellinie-p1": "\n\nTarget line - 1st point (any direction, Z is ignored): ",
@@ -122,7 +149,9 @@
"vfl-edit-kette-header": "\n\nChain with %1 segment(s):",
"vfl-edit-abgespielt": "\n>>> %1 segment(s) replayed, %2 undone - then continue interactively.",
"vfl-edit2-reset-info": "\n>>> Rebuilding this Modus-2 chain identically from the saved inputs...",
"vfl-konvert-fehler": "\n>>> ERROR converting %1: %2 - the old block is gone, the partial geometry is loose in the drawing.",
"vfl-konvert-fehler": "\n>>> ERROR converting %1: %2 - the old block is left unchanged.",
"vfl-konvert-grund-journal": "journal is insufficient (%1)",
"vfl-konvert-grund-kein-block": "no block created",
"vfl-restore-prompt-auswahl": "\nSelect the loose chain geometry (the section XDATA of the objects is read):",
"vfl-restore-keine-sektionen": "\n>>> The selection carries no section XDATA (SSG_VF_EDIT_SEG) - no chain can be restored from it.",
"vfl-restore-luecke": "\n>>> WARNING: section %1 is missing from the selection - only segments 1..%2 will be restored.",
@@ -169,7 +198,7 @@
"vfl-soll-xyz": "\n Target: X=%1 Y=%2 Z=%3",
"vfl-ist-xyz": "\n Actual: X=%1 Y=%2 Z=%3",
"vfl-abweichung-xyz": "\n Deviation: dX=%1 dY=%2 dZ=%3 mm",
"vfl-m3-titel": "\n VF LINE PATH - Mode 2: path + target height (finished; anchors + solver + build)",
"vfl-m3-titel": "\n VF LINE PATH - Mode 2: from 3D line WITH target height (anchors + solver + build)",
"vfl-m3-alert-gf-modul": "Gefaellestrecke module not loaded!",
"vfl-m3-pfad-waehlen": "\n\nSelect path objects (lines/arcs):",
"vfl-m3-keine-objekte": "\nNo objects selected - aborting.",
@@ -224,13 +253,24 @@
"vfl-m3-kletter-zu-kurz-flach": "\n No climb angle fits (segment too short) -> run is built entirely flat, height is absorbed by GF1.",
"vfl-m3-kletter-flach-gf": "\n Flat zone: GF compensation (GF1) = %1 mm",
"vfl-m3-alert-vf-zu-lang": "VF run is %1 m long (limit %2 m) - please re-plan (e.g. insert an intermediate motor station).",
"vfl-m2-einheit-grenze": "This VF unit cannot be built like this.\n\nMeasured: %1 m length, %2 vario curves.\nAllowed per unit (between deflection and motor station): at most %3 m and %4 vario curves.\n\nPlease classify the bend in segment %5 as a GF bend - the first unit then ends before it with a motor station and the second one starts after it with a deflection station.",
"vfl-m2-einheit-grenze-unteilbar": "This VF unit cannot be built like this.\n\nMeasured: %1 m length, %2 vario curves.\nAllowed per unit (between deflection and motor station): at most %3 m and %4 vario curves.\n\nThere is no bend at which the run could be split - please shorten the path or plan a corner where the unit can end.",
"vfl-m3-warnung-fueller-eingang-zu-kurz": "\n WARNING: filler right after the reversing station is too short (%1 mm < minimum %2 mm) - only the minimum clearance was built, target position not reached exactly.",
"vfl-m3-warnung-fueller-ausgang-zu-kurz": "\n WARNING: filler right before the motor station is too short (%1 mm < minimum %2 mm) - only the minimum clearance was built, target position not reached exactly.",
"vfl-m3-lauf-anfang-header": "\n\nThe VF run is the start of the selected path. Start the run with:",
"vfl-m3-lauf-anfang-opt-offen": "\n 1 - No reversing station (open start, continue/merge later)",
"vfl-m3-lauf-anfang-opt-offen": "\n 3 - No reversing station (open start, continue/merge later)",
"vfl-m3-lauf-anfang-opt-umlenk": "\n 2 - Reversing station directly (no GF1/separator)",
"vfl-m3-lauf-anfang-opt-umlenk-gf1": "\n 3 - Reversing station with GF1 + separator",
"vfl-m3-lauf-anfang-opt-umlenk-gf1": "\n 1 - Reversing station with GF1 + separator",
"vfl-m2-uebergang-bogen-fehlt": "Transition bend %1 is missing from the bend table - the block cannot be loaded or has no measurable KS. The run is built without its length share and therefore comes out too long by that amount.",
"vfl-m2-segwert-unbekannt": "Segment %1 cannot be read: chain %2 contains an unknown classification value. Build aborted - guessing a segment type would rebuild the chain incorrectly.",
"vfl-m2-eck-korrektur": "\n Corner correction %1 mm on segment %2 (drawn arc versus footprint of the corner component).",
"vfl-m2-abschluss-fussabdruck": "\n Closing footprint %1 mm deducted from segment %2 (closing bend + motor station sit on it).",
"vfl-m2-kletter-ende-fussabdruck": "\n Climbing end: %1 mm deducted from segment %2 (motor station + separator + ES sit on the climber, not on a filler).",
"vfl-m2-as-fussabdruck": "\n AS footprint %1 mm deducted from segment %2 (the AS element sits on it).",
"vfl-m2-anfang-wert-unbekannt": "Cannot read run start: chain %1 contains the unknown value %2. Build aborted - guessing a start variant would rebuild the chain incorrectly.",
"vfl-m3-lauf-anfang-offen-hinweis": "\n Start deliberately left open - no reversing station/GF1/separator built; continue later or join with Vario_Kette_Merge.",
"vfl-m2-anfang-offen-gesperrt-zeile": "\n (not selectable - with an AS element the run needs a reversing station)",
"vfl-m2-anfang-offen-gesperrt": "With an AS element an open start is not possible - the run then needs a reversing station.",
"vfl-m3-lauf-abschluss-header": "\n\nThe VF run is the end of the selected path. End the run with:",
"vfl-m3-lauf-abschluss-opt-offen": "\n 1 - No motor station (open end, continue/merge later)",
"vfl-m3-lauf-abschluss-opt-motor": "\n 2 - Set motor station (no ES element)",
@@ -246,6 +286,7 @@
"vfl-m3-gf2-ausgleich": "\n GF2 (measured compensation): L=%1 mm",
"vfl-m3-kurve-back-uebersprungen": "\n >>> [M3a] Vario curve in back run - skipped.",
"vfl-m3-nichts-gebaut": "\nNothing built - aborting.",
"vfl-m3-alt-journal": "\n Note: this chain predates the build AS / build ES questions - it is rebuilt in the old order.",
"vfl-m3-fertig-header": "\n>>> VF line path (mode 2) built! <<<",
"vfl-m3-ziel-soll": "\n Target (nominal): X=%1 Y=%2 Z=%3",
"vfl-m3-es-ist": "\n ES (actual): X=%1 Y=%2 Z=%3",
@@ -280,6 +321,7 @@
"kreisel-edit-bestehend": "\n-> Existing: Distance=%1 Rotation=%2 Type=%3",
"kreisel-edit-dialog-fehlt": "Dialog not available: %1",
"kreisel-eingefuegt": "\n-> Kreisel #%1 inserted: %2 (height=%3)",
"kreisel-emsg-abstand-zu-klein": "Distance too small! (%1 < %2) - the end circles would touch/overlap.",
"kreisel-emsg-distanz-klein": "Distance too small! (%1 < %2)",
"kreisel-hoehe-aus-3dpunkt": "\n-> Height taken from 3D point: %1",
"kreisel-hoehe-aus-basispunkt": "\n-> Height taken from base point: %1",
@@ -633,6 +675,8 @@
"dim-switch-blocks": "\n DXFM_BLOCKS = %1",
"dim-switch-omniflo": "\n DXFM_OMNIFLO = %1",
"dim-batch-fertig": "\nConversion to %1 complete: %2 GF, %3 VF rebuilt (%4 already in target dimension).",
"dim-batch-fehlerliste": "\n%1 polyline block(s) NOT converted (left unchanged):",
"dim-batch-fehler-zeile": "\n - %1: %2",
"sprache-gewechselt": "\nLanguage switched to: %1",
"cmd-block-auswaehlen": "\nSelect block: ",
"cmd-kein-block-ausgewaehlt": "\nNo block selected.",
@@ -685,6 +729,9 @@
"plq-geloescht": "\n[DELETE_PLANQUADRATE] Planquadrat grid removed (%1 insertion(s)).",
"plq-nichts-zu-loeschen": "\n[DELETE_PLANQUADRATE] No Planquadrat grid found in the drawing.",
"exp-check-ids": "\n[%1] Checking and assigning IDs...",
"exp-hoehencheck-frage": "\nRun the height check (mounting height/platforms) before the export?",
"exp-bereinigen": "\nPurging drawing (unused blocks, layers, linetypes) ...",
"exp-hoehencheck-fehlt": "\nNote: HOEHEN_CHECK not available - export runs without height check.",
"exp-hoehen-aktualisiert": "\nHeight attributes of %1 moved blocks reset from their Z coordinate.",
"exp-sep-proxy-fehler": "\n[EXPORT] WARNING: copying '%1' out of block '%2' failed (%3) - this element is missing from the export.",
"exp-sep-zuordnung": "\n[%1] packed separator copy/copies: ZUORDNUNG set from the wrapper block ID.",
@@ -913,6 +960,16 @@
"tro-insert-kein-block": "No symbol for this type in the drawing (%1) - run tro_annotate.py with this type first.",
"tro-insert-prompt-punkt": "\nInsertion point: ",
"tro-insert-eingefuegt": "\nTRO inserted: ID = %1, TYPE = %2",
"cmd-jam-bearbeiten": "\nEdit jam area: %1",
"jam-edit-kein-jam": "Block %1 is not a jam area (expected JAM_*).",
"jam-edit-dialog-fehlt": "Dialog file not found:\n%1\nCheck DXFM_DCL (setenv.bat).",
"jam-edit-bereich": "Jam area %1 in front of %2 (entry %3)",
"jam-edit-auto": "Derived: %1",
"jam-edit-hinweis": "Into the SCL: tro_annotate --read-jams, then scl_skeleton.",
"jam-edit-foerderer-ungueltig": "The conveyor must have four digits (e.g. 0054) - nothing changed.",
"jam-edit-nummer-ungueltig": "The running number must be a whole number from 1 - nothing changed.",
"jam-edit-gespeichert": "\nJam area saved: %1 (%2)",
"jam-edit-doppelt": "\nWARNING: %1 already exists in this drawing (%2).",
"vfl-abbruch-gesichert": "\n>>> Chain cancelled: %1 object(s) saved as a block (editable/resumable via double-click).",
"vfl-zurueck-glied-verworfen": "\n>>> Back: discarding the last chain element - please answer it again.",
"vfl-abbruch-nichts-gebaut": "\n>>> Cancelled - no geometry was created yet.",
@@ -929,13 +986,13 @@
"vfc-warnung-untermodule-nicht-geladen": "\n[vf_core] WARNING: DXFM_LISP not set - submodules could not be loaded!",
"vfc-linienzug-modus-header": "\n\nSelect line-path mode:",
"vfc-linienzug-modus-1": "\n 1 - Manual entry (click points)",
"vfc-linienzug-modus-2": "\n 2 - 3D objects + target height (boundary-value solver, finished)",
"vfc-linienzug-modus-3": "\n 3 - 3D objects step by step (forward reconstruction, work in progress)",
"vfc-linienzug-modus-2": "\n 2 - from 3D line WITH target height (heights are calculated)",
"vfc-linienzug-modus-3": "\n 3 - from 3D line WITHOUT target height (forward build with given angles)",
"prompt-wahl-1-3": "\nYour choice (1/2/3) [1]: ",
"vfl-qc-uform-nicht-implementiert": "\nERROR: 'QC line with GF and U-shape' is not yet implemented - please choose option 4 or a different mode.",
"vfc-typ-standard-beschreibung": "Standard VarioFoerderer (AS/ES 90 degrees, offset horizontally)",
"vfc-typ-etage-beschreibung": "Etage VarioFoerderer (AS/ES 30 degrees, directly stacked)",
"vfc-typ-linienzug-beschreibung": "Route group (mixed GF/VF chain; mode 1 manual / mode 2 target height finished / mode 3 step by step work in progress)",
"vfc-typ-linienzug-beschreibung": "Route group (mixed GF/VF chain; mode 1 manual / mode 2 from 3D line with target height / mode 3 from 3D line without target height)",
"vfs-schritt6-horizontal": "\n\n6/11: Horizontal intermediate section (0 deg, L=%1 mm)",
"vfs-schritt6-steigung": "\n\n6/11: Incline section (%1 deg, L=%2 mm)",
"vfs-schritt6-gefaelle": "\n\n6/11: Slope section (%1 deg, L=%2 mm)",
@@ -964,7 +1021,7 @@
"vfe-step14": "\n\n14/15: Separator (300mm, cur-hz=%1)",
"vfe-step15": "\n\n15/15: %1 (end, chained cur-hz=%2)",
"vfe-eingefuegt": "\n>>> Etage VarioFoerderer inserted! <<<",
"vfl-vwnb-titel": "\n VF LINE PATH - Mode 3: 3D objects step by step (forward reconstruction, work in progress)",
"vfl-vwnb-titel": "\n VF LINE PATH - Mode 3: from 3D line WITHOUT target height (forward build)",
"vfl-vwnb-aus-seite-menu": "\n\nOUT element - select side:\n 1 - Left\n 2 - Right",
"vfl-vwnb-alert-eckwinkel": "No matching arc: corner angle %1 deg is not ~30/60/90.\nPlease adjust the angles of the lines.",
"vfl-vwnb-alert-keine-gerade": "Path contains no straight - a chain must begin with a straight.",
@@ -1120,6 +1177,16 @@
"kreisel-bp-zeile": "\n Switch %1: %2 <-> %3 [%4] at X=%5 Y=%6 Z=%7",
"kreisel-bp-kollision": "\n COLLISION %1: %2 <-> %3 [%4] at X=%5 Y=%6 Z=%7",
"kreisel-bp-marker": "\n%1 markers drawn (layer %2).",
"chh-start": "\n--- Phase 3: platform families ---",
"chh-kein-kreisel": "\n Note: Kreisel module not available - per-block questions only.",
"chh-fam-frage": "\n Family %1 (%2, %3 Kreisel, mounting height %4 m): is it on a platform?",
"chh-schleife": "\n %1: flat loop on the same Kreisel (VON = BIS) - asked individually.",
"chh-buehne-hoehe": "Platform height in m",
"chh-buehne-ungueltig": "\n ! Platform height must be > 0 and < %1 m.",
"chh-kreuz-konflikt": "\n ! %1: ends in families with different platform heights (%2 / %3 m) - unchanged.",
"chh-kreuz-hoehe": "\n ! %1: family heights differ by %2 mm (> %3 mm) - unchanged.",
"chh-strecke-neg": "\n ! %1: platform %2 m >= mounting height %3 m - unchanged.",
"chh-summe": "\n Phase 3: %1 family(ies), %2 on a platform; adjusted: Kreisel %3, sections within family %4, between families %5; conflicts %6; asked individually %7",
"exp-kreisel-weichen": "\n[%1] Kreisel switch points: %2 contact(s), %3 collision(s) -> %4",
"exp-kreisel-kollision": "\n[%1] WARNING: %2 Kreisel collision(s) - command KREISEL_WEICHEN shows them.",
"lg-daten-fehlt": "\n[Storage] Data file not found: %1 - built-in defaults apply.",
@@ -1219,6 +1286,58 @@
"lg-regel-profil-fehlt": "\n[Storage] Rule profile %1 not found (%2).",
"lg-regel-profil-ungepflegt": "\n[Storage] WARNING: rule profile %1 is not maintained - inherited values apply.",
"lg-regel-unbekannt": "\n[Storage] Rule %1 not in profile.",
"lg-regel-liste-kopf": "\nRule profile %1: %2 rules (context: increased fire risk without extinguishing system)"
"lg-regel-liste-kopf": "\nRule profile %1: %2 rules (context: increased fire risk without extinguishing system)",
"kf-fehler-daten-fehlt": "\nERROR: chain conveyor data not found: %1",
"kf-fehler-daten-leer": "\nERROR: chain conveyor data could not be read.",
"kf-fehler-block-datei": "\nERROR: block file for %1 not found (expected in data/omniflo/<dimension>/).",
"kf-fehler-ks-fehlt": "At least one component is missing KS_EIN or KS_AUS - the chain cannot be linked. Command KF_KS_PRUEFEN shows which block is affected.",
"kf-fehler-hoehe-zu-klein": "The installation height is too small: the deflection and drive stations already contribute more height than requested. Please choose a greater height.",
"kf-fehler-laenge-unter-min": "The intermediate section would be shorter than permitted. Please choose a greater installation height.",
"kf-fehler-laenge-ueber-max": "The intermediate section would be longer than permitted. Please choose a smaller installation height.",
"kf-fehler-winkel-null": "The measured installation angle of the intermediate section is horizontal - no height can be gained. Please check the KS positions of the blocks (KF_KS_PRUEFEN).",
"kf-fehler-dcl": "Dialog file kettenfoerderer.dcl not found.",
"kf-prompt-messpunkt-1": "\nSelect first measuring point (lower reference): ",
"kf-prompt-messpunkt-2": "\nSelect second measuring point (upper reference): ",
"kf-messung-ergebnis": "\n>>> Measured: height difference dZ = %1 mm (for reference dY = %2 mm).",
"kf-konsole-hoehe-hinweis": "\n(enter 0 to measure the height from two points)",
"kf-2d-gebaut": "\n>>> Plan view %1 inserted: slope length %2 mm, inclination %3 deg.",
"kf-2d-laenge-null": "\nPlan view skipped: the chain has no measurable plan length.",
"kf-2d-ks-fehlt": "\nPlan view skipped: %1 has no measurable KS_EIN/KS_AUS.",
"kf-prompt-startpunkt": "\nSelect insertion point (KS_EIN of the plan view; the side view is built above it): ",
"kf-prompt-drehung": "\nRotation angle of the chain: ",
"kf-abgebrochen": "\nCancelled.",
"kf-fertig": "\n>>> %1 created: installation height %2 mm, intermediate section %3 mm.",
"kf-konsole-variante-header": "\n\nSelect inclined steel conveyor type:",
"kf-konsole-option": "\n %1 - %2",
"kf-konsole-variante-prompt": "\nInclined steel conveyor type",
"kf-konsole-hoehe-prompt": "\nH - installation height of inclined conveyor [mm]",
"kf-konsole-verbindung-header": "\n\nSelect connecting elements:",
"kf-konsole-verbindung-prompt": "\nConnecting elements",
"kf-konsole-farbe-header": "\n\nSelect conveyor colour:",
"kf-konsole-farbe-prompt": "\nColour",
"kf-konsole-antriebsmotor-header": "\n\nSelect conveyor drive motor:",
"kf-konsole-antriebsmotor-prompt": "\nConveyor drive motor",
"kf-variante-label": "%1 %2",
"kf-variante-label-standard": "%1 %2 (default)",
"kf-konsole-movimot-header": "\n\nDrive with Movimot?",
"kf-konsole-movimot-prompt": "\nDrive with Movimot",
"kf-konsole-steuerung-header": "\n\nWith standard control system?",
"kf-konsole-steuerung-prompt": "\nWith standard control system",
"kf-pruef-kopf": "\n\n=== KF_KS_PRUEFEN: KS positions of the chain conveyor blocks ===",
"kf-pruef-variante": "\n\n--- Variant: %1 ---",
"kf-pruef-block": "\n %1: KS_EIN (%2, %3) direction %4 | KS_AUS (%5, %6) direction %7",
"kf-pruef-block-fehlt": "\n %1: block file not found.",
"kf-pruef-ks-fehlt": "\n %1: KS incomplete - KS_EIN: %2, KS_AUS: %3",
"kf-pruef-ks-fehlt-kurz": "\n[KF] KS_EIN/KS_AUS not readable on component: %1 (command KF_KS_PRUEFEN shows details)",
"kf-pruef-fehler": "\n Geometry could not be determined: %1",
"kf-pruef-geo": "\n Installation angles (deg): deflection %1, intermediate %2, drive %3\n Height contribution (mm): deflection %4, drive %5\n Intermediate section native (mm): dx %6, dy %7",
"kf-pruef-ja": "present",
"kf-pruef-nein": "MISSING",
"kf-edit-waehlen": "\nSelect chain conveyor (KF_n) to edit: ",
"kf-edit-kein-kf": "The selected block is not a chain conveyor (KF_n).",
"kf-edit-fertig": "\n>>> %1 rebuilt as %2.",
"cmd-kettenfoerderer-bearbeiten": "\n>>> Editing chain conveyor %1 ...",
"vfl-m2-nachrechnen": "\n Folded run: lengths redistributed at the same angle - GF %1 -> %2 mm, climbing section %3 mm (GF1 sits in the entry leg and does not consume the climber span).",
"vfl-m2-nachrechnen-fehl": "The chosen angle of %1 degrees no longer works with the corrected length balance. The chain is built with the original distribution and may therefore end too early - please check the actual/target comparison or pick a different angle."
}
}